Dialogic Diva Pro PCI Installation Manual download pdf (Page 16)

GFI FaxMaker 1 Installing fax devices | 16

Screenshot 18: Define VoIP gateway properties

5. Depending on the VoIP gateway selected, provide the properties of the VoIP gateway. Typically this

consists of the IP address of the VoIP gateway and any authentication settings required by your VoIP

gateway. Click Next to continue setup.

6. Provide a meaningful description of the newly created controller and decide how many channels

should be available for GFI FaxMaker.

7. Click Next and Finish to finalize settings.

8. From the GFI FaxMaker Configuration Wizard, click Configure lines to configure fax lines. For

more information on how to configure GFI FaxMaker fax lines, go to:

http://support.gfi.com/manuals/en/fax2013/default_csh.htm#1011.

9. Finalize the GFI FaxMaker Configuration Wizard.

NOTE

The GFI FaxMaker machine may require a reboot if any files were locked (in use) during

installation.

1.6 Installing fax modems or multi port fax boards

If you are planning to use a fax modem for faxing, you can choose to use either the GFI fax modem

drivers or the fax modem drivers included in Windows

2000/2003. It mainly depends on the modem

that you are using and which driver will work best. For some modems, the Windows

2000/2003

modem drivers might work better since GFI cannot offer you such a wide range of modem support as

Microsoft

can. If you require DTMF routing and plan to use modems (not recommended) then you

must use the GFI modem drivers.

In general, GFI recommends trying both drivers with your modem and choosing the driver that works

best.

1 2 ... 11 12 13 14 15 16 17 18 19 20

No comments

Dialogic Diva Pro PCI Installation Manual Page 16