Dialogic 4000 Series SU4.1 User's Guide Page 64
- Page / 316
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
64 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Parameter Reference
3.3.4 TLS Group
The TLS su/jointfilesconvert/390756/bgroup includes the following parameters:
• TLS Transport Enabled
• TLS Server Port
• SSL TLS Protocol
• Mutual TLS Authentication Required
• TLS Inactivity Timer
• Verify TLS Peer Certificate Date
• Verify TLS Peer Certificate Trust
• Verify TLS Peer Certificate Purpose
3.3.4.1 TLS Transport Enabled
Description: Determines whether the TLS transport is enabled or disabled.
Allowed Values:
• Yes = TLS transport is enabled.
• No = TLS transport is disabled.
Default Value = No
INI File Parameter Name = sipTlsEnabled
Note: Unit requires a restart if this parameter value is changed.
- Dialogic 1
- 1000 and 2000 1
- Media Gateway Series 1
- Software License Agreement 3
- 6 Dialogic 6
- 8 Dialogic 8
- Contents 10
- 12 Dialogic 12
- Revision History 15
- About This Publication 21
- 22 Dialogic 22
- Related Information 23
- Overview 25
- 1.1.1 Phone Emulating 26
- 28 Dialogic 28
- • MCI (NEC Systems only) 29
- 1.2.1 Un-Routable Calls 30
- 1.2.1.1 IP to Switch Calls 31
- 1.2.1.2 Switch to IP Calls 31
- 1.4 Security 32
- 1.5 Web Interface 32
- 34 Dialogic 34
- 1.6 Online Help 35
- Media Gateway Configuration 37
- 38 Dialogic 38
- 2.3 Changing the Password 39
- 2.4 Configuration Procedure 39
- 2.5 Restart Options 40
- 2.7 Upgrading the Software 42
- 3.1 IP Settings 46
- 3.1.1.4 BOOTP Enabled 47
- 3.1.2.1 Client IP Address 48
- 3.1.2.2 Client Subnet Mask 48
- Management Interface 49
- • Ethernet Interface 50
- • Destination Address 50
- • Destination Mask 50
- • Gateway Address 50
- Ethernet Interface 51
- Destination Address 51
- Destination Mask 51
- 3.2.1 E-Mail Group 52
- E-Mail Minimum Alarm Severity 53
- Destination E-Mail List 53
- E-Mail Server IP Address 53
- Source E-Mail Address 53
- 3.2.2 SysLog Group 54
- 3.2.3 SNMP Group 55
- SNMP Minimum Alarm Severity 56
- SNMP Trap IP List 56
- SNMP Community Name 56
- SNMP System Name 56
- 3.2.4 Web Server Group 57
- 3.2.5 Telnet Server Group 58
- 3.2.6 Serial Ports Group 58
- 3.3 VoIP General Parameters 59
- 3.3.1 User-Agent Group 60
- 3.3.2 Server Group 61
- 3.3.2.2 DNS Server Address 2 62
- 3.3.3 TCP/UDP Group 63
- 3.3.4 TLS Group 64
- 3.3.4.2 TLS Server Port 65
- 3.3.4.3 SSL TLS Protocol 65
- 3.3.4.5 TLS Inactivity Timer 66
- 3.3.5 Timing Group 67
- 3.3.5.2 T2 Time 68
- 3.3.5.3 T4 Time 68
- 3.3.5.4 T1 Multiplier 68
- 3.3.6 Monitoring Group 69
- 3.3.7 QoS Group 70
- 3.3.8 Privacy Headers Group 72
- SIP-SIP Calls 73
- ISDN-ISDN Calls 74
- SIP-ISDN and ISDN-SIP Calls 75
- Transfers using SIP REFER 76
- User-User Enabled 77
- Translation Method 77
- 78 Dialogic 78
- France Telecom’s IE77 79
- 80 Dialogic 80
- 3.4.1 Network Group 82
- 3.4.2 Transport Group 82
- 3.4.3 URI Parameters Group 83
- 3.4.4 Proxy Group 84
- 3.4.5 Registration Group 85
- 3.4.6 Audio Group 86
- 3.4.6.2 Audio Compression 87
- 3.4.7 SRTP Group 88
- MKI on Transmit Stream 89
- Key Derivation Enable 89
- Key Derivation Rate 89
- Anti-replay Window Size Hint 89
- Cipher Mode 90
- Authentication Type 90
- Authentication Tag Length 90
- Unauthenticated SRTP Enable 91
- UnEncrypted SRTCP Enable 91
- UnEncrypted SRTP Enable 91
- 3.5 VoIP Media Parameters 92
- 3.5.2 Audio Group 93
- Voice Activity Detection 94
- Acceptable Media 94
- Continue Ringback on CN 94
- Packet Time for Inbound VoIP 95
- Digit Relay Mode 95
- Telephone-Event Payload Type 96
- G722 Enable 96
- 3.5.3 Fax Group 97
- Fax Server Network Group 98
- Fax/Modem Tone Relay Mode 98
- Enable V.34 Fax 98
- 3.5.4 RTP Group 99
- RTP End Port 100
- RTP QoS Byte 101
- 3.6.1.1 Inbound VoIP (Server) 102
- 3.6.2 Outbound VoIP (Client) 103
- 3.6.2.2 Realms 104
- 3.7 TDM General Parameters 105
- Dial Digit On Time 106
- Dial Inter-Digit Time 106
- Dial Pause Time 106
- Connect Outbound Call On DTMF 108
- 3.8 TDM T1/E1 Parameters 109
- 3.8.1.4 Clock Control 110
- 3.8.2.1 T1 CAS Protocol 111
- 3.8.2.2 Flash Hook 111
- 3.8.2.6 Ringing Timeout 112
- 3.8.2.7 Ring Cycle Time 112
- 3.8.2.9 Transfer Feature Code 113
- 114 Dialogic 114
- 116 Dialogic 116
- 3.8.3.1 Line Encoding 117
- 3.8.3.2 Framing 118
- 3.8.3.4 ISDN Protocol 118
- 3.8.3.5 ISDN Protocol Variant 119
- 120 Dialogic 120
- 3.8.3.9 Enable Failover 121
- 3.8.4.1 Line Coding 121
- 3.8.4.2 Framing 122
- 3.8.4.4 ISDN Protocol 122
- 3.8.4.5 ISDN Protocol Variant 123
- 3.8.4.6 Contiguous B-Channel 123
- 124 Dialogic 124
- 3.9 TDM Analog Parameters 125
- 3.9.1 Timing Group 126
- 3.9.2 Feature Code Group 127
- 128 Dialogic 128
- 3.9.3.1 MWI Confirmation Tone 130
- 3.9.4 CPID Settings Group 131
- 3.9.4.4 Analog Interface Type 132
- • Pause in Ring Cycle 133
- • Ring Burst 133
- • Polarity Reversal 133
- 3.9.5.1 Analog Receive Gain 134
- 3.10 TDM Digital Parameters 135
- 3.12 TDM Call Type Group 136
- Rule Label 137
- Calling Number Match 137
- Calling Numbering Plan 137
- Calling Type of Number 138
- Called Number Match 139
- Called Numbering Plan 139
- Called Type of Number 140
- TDM Passthrough 140
- 3.13 TDM Cause Codes Group 141
- Parameter Reference 142
- Table 8. ISDN to SIP Mapping 142
- Table 9. SIP to ISDN Mapping 144
- 3.15 Serial Ports Parameters 146
- Serial Port Parity 147
- Serial Port Data Bits 147
- Serial Port Stop Bits 147
- Serial Port Baud Rate 148
- 150 Dialogic 150
- 3.16.4 MCI Message Type 151
- 3.16.5 CPID Length 151
- 3.16.6 CPID Padding String 152
- 3.16.7 Voice Mail Port Length 152
- 3.16.8 System Number 152
- 3.16.9 MWI Response Timeout 153
- 154 Dialogic 154
- 3.17.0.1 ID 155
- 3.17.0.2 Tone Event 155
- 3.17.0.3 Tone Name 155
- 3.17.0.4 Cadence Type 156
- 3.17.0.6 Tone Frequency 156
- 3.17.0.8 Tone Cadence Time 157
- 158 Dialogic 158
- 160 Dialogic 160
- 3.18 Certificates Parameters 161
- 3.19 DSP Settings Parameters 162
- 3.19.1 DSP Advanced Settings 163
- 164 Dialogic 164
- 166 Dialogic 166
- 168 Dialogic 168
- 170 Dialogic 170
- • On = AGC is enabled 171
- • Off = AGC is disabled 171
- • Medium = Mid point 172
- 174 Dialogic 174
- • -26dBm 176
- • -33dBm 176
- • -43dBm 176
- • Maximum Live Answer Time 177
- • Minimum Live Answer Time 177
- 178 Dialogic 178
- 3.20.7 ISDN Service Class 180
- 3.20.10 Port Disable Timeout 181
- Call Progress Tones 183
- 4.2.1 Learn Tone Web Page 184
- 4.2.3 Learn Tone Progress 186
- 4.2.4 Learn Tone Results 187
- Existing Tones 188
- Unique Tones 188
- Conflicting Tones 188
- 4.2.6 Validate Tone Progress 190
- 4.2.7 Validate Tone Results 190
- Validation Errors 191
- Validated Tones 191
- Routing Table 193
- 5.1.2 TDM to VoIP Calls 194
- 5.2 Router Configuration 195
- 5.2.2 Inbound TDM Rules Table 196
- 5.2.2.1 Inbound TDM Rules 197
- CPID Matching 198
- Call Type Property Matching 199
- 200 Dialogic 200
- 5.2.2.3 Outbound Routes 202
- Device Selection 202
- CPID Manipulation 203
- 206 Dialogic 206
- 5.2.3.1 Inbound VoIP Rules 207
- 5.2.3.3 Outbound Routes 210
- 212 Dialogic 212
- 5.2.4 TDM Trunk Groups Table 213
- 5.2.4.1 TDM Port Types 214
- 5.2.5 VoIP Host Groups Table 216
- 5.3 Offline Testing 217
- 5.4 Call Routing Examples 220
- Inbound TDM Rules 222
- Inbound TDM Request Matching 222
- Outbound Routes 222
- Inbound VoIP Rules 223
- Example #6 – Toll Bypass 241
- Media Gateway Parsers 247
- 248 Dialogic 248
- 6.2.2 Call Class Rules 252
- Rule Syntax 253
- Rule Order 254
- Reason Tokens 254
- Data Security 255
- 256 Dialogic 256
- 7.2.2 HTTPS Example 257
- 258 Dialogic 258
- 7.3.3 TLS Examples 259
- 7.4 Secure Voice Data 260
- Example1: 261
- Example 2: 262
- Unit Status 265
- 8.2 Alarm Information 266
- 8.5 MIB-II Status Information 267
- 8.6 Version Information 268
- 8.7 Diagnostics Information 268
- Diagnostics 269
- 9.1.2.1 Configuration Options 270
- 9.1.2.2 Test Status 271
- 9.2 TDM Interface Test 272
- 9.2.2.1 Configuration Options 274
- 9.2.2.2 Test Status 274
- 9.2.2.3 Call Log 275
- 9.3.1.1 Features 276
- 9.3.1.2 Restrictions 276
- 9.3.1.3 Capabilities 277
- 9.3.1.4 Location 277
- 9.3.2.1 Configuration Options 279
- 9.3.2.2 Call Flows 279
- Initiate Call / Answer Call 279
- 280 Dialogic 280
- Send Message Waiting Status 281
- 9.3.2.3 Test Status 282
- 9.3.2.4 Test Results 283
- 9.3.2.5 Test Failures 283
- 9.3.2.6 Call Log 284
- 9.4 Diagnostic Logging 285
- 9.4.2 Trace Capture 286
- 288 Dialogic 288
- 9.4.3 Network Capture 289
- 290 Dialogic 290
- 9.4.4 TDM Capture 291
- 292 Dialogic 292
- Connector 293
- 9.6 Trace Mechanism 294
- 9.6.1 Trace Format 295
- 9.6.2 Trace Utility 295
- 9.6.2.2 Trace Type 297
- 9.6.3 Trace Commands 298
- 9.6.3.2 trace default 299
- 300 Dialogic 300
- Example 2 301
- Example 3 302
- Example 4 304
- 9.7 Diagnostic Commands 305
- 9.7.4 Ver Command 306
- 9.7.5 Alarm List Command 306
Related products and manuals for Gateways/controllers Dialogic 4000 Series SU4.1
(10 pages)© 2020, manymanuals.com. All rights reserved. | 0.148 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals