Dialogic DMG1008DNI User Manual

1 MMiiccrroossoofftt EExxcchhaannggee SSeerrvveerr 22000077 UUnniiffiieedd MMeessssaaggiinngg PPBBXX CCoonnffiigguurraattiioonn NNoott

10 Point1: h10 Point2: Point3: Point4: Point5: Point6: Important no

11 name fields in the PBX to get integration to work. If you do not use this (7434ND) station type and instead opt to use the 8434 station type, then

12 6. Exchange 2007 UM Validation Test Matrix The following table contains a set of tests for assessing the functionality of the UM core feature set

13 5 Dial Auto Attendant (AA). Dial the extension for the AA and confirm the AA answers the call. P 6 Call Transfer by Directory Search. 6a

14 extension. Confirm the FAX is received in the user’s inbox. 10 Setup TLS between gateway/IP-PBX and Exchange UM. Replace this italicized text

15 6.1. Detailed Description of Limitations Failure Point Phone type (if phone-specific) Call scenarios(s) associated with failure point List

16 7. Troubleshooting 7.1. Important Debugging Tools • Ethereal/Wireshark – Used to view and analyze the network captures provided by the Dialogic

17 Appendix 1. Dial Pilot Number and Mailbox Login • Dial the pilot number of the UM server from an extension that is NOT enabled for UM. • Confir

18 b. From an External Phone • From an external phone, dial the extension for a UM-enabled user and leave a voicemail message. • Confirm the voice

19 • Note: Even though some keys are associated with three or four numbers, for each letter, each key only needs to be pressed once regardless of th

2 Content This document describes the configuration required to setup Avaya Definity G3 and Dialogic® 1000 Media Gateway Series (DMG1008DNI) using di

20 • Once it is received in the user’s inbox, use OWA’s Play-On-Phone to dial an internal extension. • Confirm the voicemail is delivered to the co

21 9. FAX • Use the Management Console or the Management Shell to FAX-enable a user. • Management Console: • Double click on a user’s mailbox and

22 12. Message Waiting Indicator (MWI) • Although Exchange 2007 UM does not natively support MWI, Geomant has created a 3rd party solution - MWI2007

3 1. Components Information 1.1. PBX or IP-PBX PBX Vendor Avaya Model Definity G3 Software Version R009i.05.122.4 Telephony Signaling Digital se

4 2.3. Cabling Requirements It is recommended that total loop length (cable distance between PBX connection and the gateway interface) be no longer

5 5. PBX Setup Notes The basic steps of setting up the PBX are as follows: • Setting up each gateway station port. • Defining hunt group to act as

6 H.320 Conversion? n Per Station CPN - Send Calling Number? y Audible Message

7 6: 18: 7: 19: 8: 20: 9:

8 Page 4 • Ensure that all feature buttons listed on this page are blank. Page 5 • Because you have administered a display module on this station

9 10 : 23 : 11 : 24 : 12 : 25 : 13 :